The floor in the Kitchen photos of a property in the Leicester suburb of Stoneygate are not as you might think made of wood but are in fact Wood Effect Porcelain Tiles. They had recently been installed but unfortunately the tiler had not managed to remove all the grout resulting in a film of grout haze on the surface. This film does affect the appearance of the tile and due to the textured nature of the grout it will also attract dirt more easily making it much more difficult to keep clean.
Normally grout haze can be removed using an acid-based product such as Tile Doctor Grout-Clean-up however this was a modern polymer cement grout which is much harder to remove. Unsure how resolve the problem we were tasked by our customer to remove the grout haze and clean up the tiles to improve their appearance.
Removing Grout Haze from a Wood Effect Porcelain Tiled Floor
Before tackling the grout haze, the floor was thoroughly vacuumed and a silicone seal ran along the kitchen unit end panels to help protect against moisture ingress during cleaning.
The next step was to break down the polymers in the grout haze using Tile Doctor Remove and Go which is a versatile floor cleaning product we usually use to remove coatings such as sealers. This was allowed to dwell prior to agitation with an abrasive Tile Doctor 800-grit diamond pad. The resultant slurry was then rinsed off the tiles with water and extracted with a wet vacuum.
Next, I tackled the grout haze by giving the floor a wash and scrub in Tile Doctor Grout Clean-Up diluted 1 to 10 with water. This product is designed for removing grout haze or grout smears as its sometimes referred to. This was agitated with a White floor pad getting into grain of the wood effect and removing the remaining grout and paint spots from decorating. Once done the floor was rinsed with water again and the slurry extracted using a wet vacuum as before.
Sealing Grout on a Porcelain Tiled Floor
With the grout haze removed the floor looked so much better and due to the nature of Porcelain should stay that way. Grout however is easily stained and there’s much more risk of that happening in a Kitchen so before leaving I agreed to seal the grout.
First the grout needed to be dry so I force dried the tiles with floor fans, then applied Tile Doctors Ultra Seal ‘natural look’ impregnating sealer to the grout lines.
For aftercare I left my client with a bottle of Tile Doctor pH Neutral Tile Cleaner which is a gentle but effective cleaning product designed for use on tile and stone.
When cleaning Floor tiles with a mop we recommend using two buckets, one containing a neutral pH cleaning fluid such as Tile Doctor Neutral Tile Cleaner or Stone Soap and the second where you rinse your mop afterwards, otherwise you will contaminate your cleaning fluid with dirt every time you rinse.