Market Harborough Tile Cleaning

Details below of a restorative clean and seal we completed of an Edwardian Quarry Tiled Floor and Edwardian Geometric Floor at a house in the town of Market Harborough, Leicestershire. Market Harborough is a very old town that dates back to Saxon times, as a result it has some very old buildings including the church that was built in the 1300’s.

Both floors had been hidden underneath carpets for many Years. They were exposed by our customer thirteen years ago, who had painstakingly removed the cement-based levelling screed from the Quarry Tiled Kitchen Floor.

The floors were moisture damaged from years of inherent damp build-up and didn’t look their best with ingrained historic soiling and damage to the hall tiles.

We were asked to quote for a restorative cleaning, sealing and repairs by our customer. After inspecting the floor, we quoted for the work and advised how long it would take to complete. We also guided our customer where to purchase period reproduction tile replacements from. In this instance our customer purchased made to order tiles from world renowned tile manufacturer Craven Dunnill in Bridnorth, Shropshire.

Cleaning Edwardian Quarry Tiles

We carried out repairs first carefully removing the damaged tiles and fixing in place the replacements purchased by the customer. Some of the original tiles were also loose but in good physical condition so these were re-fixed in place and grouted in.

Once the grout had set we started the cleaning process with the application of Tile Doctor Remove & Go ready to use heavy duty cleaning solution and coatings remover to the tiles. Working in small sections we allowed the product to soak into the tile for thirty minutes and then agitated the solution, with both an abrasive brush and a coarse 200 grit pad. This process quickly broke down the years of soiling and surface contamination. We extracted the resulting slurry and followed up with the application of Tile Doctor Acid Gel to treat inherent cement contamination and historic efflorescence salt staining. This was again worked into the tiles and the floor rinsed using low moisture methods.

We had arranged to seal the floor the next day, so air movers and a fan heater were left in place to help dry the floor overnight.

Sealing Edwardian Quarry Tiles

On the second day after confirming the tiles were dry we sealed the tiles with four coats of Tile Doctor Colour Grow which is a colour enhancing sealer that soaks into the pores of the tile protecting it from within. The floor was then buffed by hand to remove excess sealer and was ready for use within the hour. We advised the customer that whilst the floor could be walked on quite quickly, that the sealer would take up to 48 hours to fully cure.

Before leaving we advised the customer that the sealer can be prematurely worn down by the use of strong cleaning products and so recommended the they use Tile Doctors pH Neutral Floor Cleaning concentrate. This should always be diluted correctly, and the water changed frequently, to avoid suspended soils from being deposited back onto the surface of the floor. If properly maintained, then the sealer should last a minimum of 5 years.

Cleaning an Edwardian Quarry Tiled Floor in Leicestershire