At Tile Doctor, we carry out professional tiled floor restorations in both residential and commercial environments. In this particular case we were asked to take a look at the tiles at a Car Dealership in the town of Melton Mowbray, Leicestershire. Melton Mowbray is known as the “Rural Capital of Food”, thanks to its range of local specialities, including its famous pork pie and Stilton cheese.
The problem was focused in the toilet area, where the non-slip Ceramic tiles had suffered heavy soil build-up. Since the cleaning contractor was unable to tackle the issue, Tile Doctor was recruited to restore the area using specialist tile cleaning methods and products.
Cleaning non-slip Ceramic Tiles
Judging by the level of soil build-up on the floor I mixed a solution of one part Tile Doctor Pro-Clean (a high alkaline cleaner) with five parts of water. This was then left to dwell on the tiles so the solution could seep into the crevices of the non-slip tile breaking it down and making it easier to clean.
I agitated the solution using scrubbing pads to remove the soil which once the dirty cleaning solution was rinsed away and removed using a wet vacuum made a dramatic difference to the overall appearance of the floor.
Removing Grout Smears from Ceramic Tiles
The floor looked much better however now it was clean I could see a film of grout haze residue on the surface of many of the tiles which had been left over from the initial installation. To tackle this problem I applied Tile Doctor Grout Clean-Up which along with grout haze this product can also remove rust stains and other mineral deposits.
I was now happy with the condition of the ceramic tile and grout and after another rinse with water I promptly force dried the floor with a special fan in order to get the toilet ready for use again. You only need to look at the before and after photos to see the difference!
Tile cleaning for heavily soiled Ceramic tile floor in Leicestershire
The photographs before are of Marble floor installed in the kitchen of a house in Melton Mowbray, that we recently refinished. The honed matte marble tiles had previously been finished with a water-based topical floor sealer by the customer to create a polished finish; unfortunately the coating had become damaged, worn and now soiled.
To restore the finish with something more durable we recommended the removal of any remaining coatings, then re-finishing with our restorative diamond encrusted burnishing pad system and then re-sealing with an impregnating rather than topical sealer. Our quote was accepted and we returned on the agreed date to restore the floor.
Deep Cleaning Marble Tile and Grout
The first step was to remove the old coating and clean the grout using a strong dilution of Tile Doctor Pro-Clean which is a strong alkaline formula that is safe to use on stone. The solution was scrubbed into the grout using a stiff brush and also worked into the Marble floor using a rotary machine fitted with a black scrubbing pad. The now dirty cleaning solution was then rinsed away using water and extracted with a wet vacuum.
Burnishing a Marble Tiled Floor
The next step was to burnish the floor using a set of Tile Doctor burnishing pads starting with a coarse pad to strip the Marble back and then moving onto the finer grit pads from medium to extra fine to re-build the polish. The pads are lubricated with a little water and you need to rinse the floor after each pad.
Sealing the Marble Floor
We left the floor to dry overnight and then came back the next day to seal the floor with Tile Doctor Ultra Seal which is a premium, no-sheen, natural-look impregnating sealer formulated to provide maximum stain protection and recommended for food preparation areas, two coats were sufficient.
Once completed we recommend that the floor was maintained using Tile Doctor Stone Soap which is an after care cleaning solution designed for honed or polished stone floors.
Re-Polishing Marble Floor in Melton Mowbray